Clean Armor 700 Interior Clear Coat | Satin

Clean Armor Wood 700 is a UV-curable interior clear coat designed for superior protection, clarity, and efficiency. Applied by spray, roll, or brush, it cures in seconds with a handheld UV light and can also be used over existing fully cured finishes. This high-build, optically clear coating provides professional-grade durability with minimal sanding and exceptional flow, making it ideal for both production and refinishing work.

Unlike traditional solvent-based finishes, Clean Armor coatings are completely VOC-free and non-yellowing, delivering a cleaner and safer working environment without compromising on performance. Their patented UV-curable technology hardens instantly, reducing downtime while producing a stronger, more resilient finish that stands up to daily wear and harsh conditions.

Features

• High-build formula suitable for production and professional use
• Exceptional resistance to chemicals, heat, abrasion, and impact
• Excellent flow, levelling, and adhesion
• Optically clear and non-yellowing finish
• Superior inter-coat adhesion - no sanding required between coats
• Minimal sanding needed during application
• No restrictions on film build thickness
• Suitable for thin or high-build applications
• Can be applied over fully cured coatings that accept new finishes
• Eco-friendly, VOC-free formulation for a safer, sustainable finish

Example Applications

• Tabletops and counters
• Cabinetry
• Doors and trims
• Handrails
• Furniture
• Wood products and refinishing projects

Available Finishes

Gloss, Satin, and Matt

Sheen Levels

Matt: 5-15° gloss*
Satin: 20-40° gloss*

*Sheen levels measured using spray application. Results may vary with hand application.

Coverage:
Approximate coverage at 25 microns (0.025 mm) film thickness: 39.4 m² per litre.

Important Notes:
Clean Armor coatings are heat and light sensitive. Always store and handle away from direct light or high temperatures to avoid accidental curing.

Store the product in its original, sealed container within a temperature range of 10°C to 32°C (50°F to 90°F). Do not return unused material to the original bottle.

Refer to the Technical Data Sheet for detailed storage and application instructions.