RPM Chimiver adhesive, expanding glue for parquet repairs

¤Description ADESIVER RPM is a one-component self-expanding adhesive for quick repairs. It is a high tenacity polymer, hard and with a high adhesive power.

¤ Uses: Fixing wooden planks that are not perfectly glued to the support.

¤Features Monocomponent cure ratio

Application temperature +10°C ÷ +25°C

Pot-Life Syringe Application na

Maximum open time na Hardening 2 h (1)

Yield na Brown color Possible dilution DILUENTE DMC 50 Storage stability 6 months (2)

Packages 0.5 kg

Tool cleaning DILUENTE DMC 50 (when the adhesive is fresh) 1 at 20°C and 65% RH 2 in closed original containers and at temperatures between +10°C and +25°C

¤How to use Make a hole at the ends of the tablets with a Ø 3-4 mm drill bit until you reach the concrete slab. Inject a few drops of water with a syringe. After about 2 minutes, inject 1-2 ml into the same hole. of ADHESIVES RPM. During the hardening phase, ADESIVER RPM increases in volume, therefore it is recommended not to exceed the injected quantities. After this period, the tablet will be tenaciously glued to the support. Any excess of ADESIVER RPM must be removed with a blade. If the repair of the tablets takes place on an already painted floor, it is advisable to delimit the area to be repaired with adhesive tape. After the repair work, clean the unhardened product with DILUENTE DMC 50 polyurethane thinner. When using ADESIVER RPM, it is advisable to use all personal prevention systems.